HOW TO TOAST
•
To use the oven only, make sure that stove selector (5) is completely turned to
“
” OFF position.
•
Set the stove selector (5)
to “
” OFF position, and the oven will start to work.
However, once the oven is turned on, the stove/ hot plates will stop working as it will
not work together.
1. Turn the operation selector knob (3) to
TOAST
.
2. Place food to be toasted onto the wire rack.
3. Turn the Temperature Selector dial to the desired temperature.
4. Turn the timer dial to the desired cooking time.
5.
Turn the timer control knob to “OFF”.
6.
When finished toasting, turn the both timer and operation selector to “OFF” position
to switch off the oven.
Note
: Wire rack should be positioned in the middle of the oven with the indentations pointing
down.
CARE AND CLEANING
Any spattering that occurs whilst cooking and comes into contact with the continuous coating
is oxidized while the oven is in operation. If desired, wipe the walls with a damp sponge,
cloth or nylon scouring pad and mild detergent.
All accessories should be washed in warm soapy water. The door can be cleaned with a
damp sponge and wiped dry with paper towel or a cloth. Clean the outside with a damp
sponge.
WARNING: BE SURE TO UNPLUG THE OVEN AND ALLOW IT TO COOL BEFORE CLEANING
CAUTION: WHEN SLIDING TRAYS OUT OF OVEN, ALWAYS SUPPORT THE RACK.
DO NOT LET GO UNTIL YOU ARE SURE THE RACK IS HELD SECURELY.
NOTE: DO NOT USE STEEL WOOL SCOURING PADS, ABRASIVE CLEANERS, OR
SCRAPE THE WALLS WITH METAL UNTENSILS, AS ALL OF THESE METHODS MAY
DAMAGE THE CONTINUOUS CLEAN COATING.
