Reference Design HFRD-34.0 (Rev.3, 05/08)
Maxim Integrated Products
Page 13 of
18
CM
3
Default
Sets the default configuration for the reference design
(Audio/Video/USB
In1
to
Audio/Video/USB
Out1;
Audio/Video/USB In2 to Audio/Video/USB Out2, etc.)
CM
4
Demo Mode
Puts the reference design into a demonstration mode. When in this
mode, the controller will loop through the default and saved
configurations at a preset time interval. This operation allows for
automatic switching of the DVI and audio signals. Please note: The
USB configuration is not switched in demo mode (only DVI and
Audio).
CM
5
Main Menu
Return to Main Menu
VSM
1
DVI Out1
Allows the user to switch DVI output 1 to any DVI input (1 through
4). The current switch selection is highlighted.
VSM
2
DVI Out2
Allows the user to switch DVI output 2 to any DVI input (1 through
4). The current switch selection is highlighted.
VSM
3
DVI Out3
Allows the user to switch DVI output 3 to any DVI input (1through
4). The current switch selection is highlighted.
VSM
4
DVI Out4
Allows the user to switch DVI output 4 to any DVI input (1through
4). The current switch selection is highlighted.
VSM
5
Main Menu
Return to Main Menu
ASM
1
HeadphoneOut1 Allows the user to switch headphone output 1 to any audio input (1
through 4). The current switch selection is highlighted.
ASM
2
HeadphoneOut1 Allows the user to switch headphone output 2 to any audio input (1
through 4). The current switch selection is highlighted.
ASM
3
Line Out1
Allows the user to switch line output 1 to any audio input (1 through
4). The current switch selection is highlighted.
ASM
4
Line Out2
Allows the user to switch line output 2 to any audio input (1 through
4). The current switch selection is highlighted.
ASM
5
Main Menu
Return to Main Menu
USM
1
USB HUB1 Out
Allows the user to switch USB hub 1 to any USB input (1 through
4). The current switch selection is highlighted. Note: Fanout is not
supported in the USB switch.
USM
2
USB HUB2 Out
Allows the user to switch USB hub 2 to any USB input (1 through
4). The current switch selection is highlighted. Note: Fanout is not
supported in the USB switch.
USM
3
USB HUB3 Out
Allows the user to switch USB hub 3 to any USB input (1 through
4). The current switch selection is highlighted. Note: Fanout is not
supported in the USB switch.
USM
4
USB HUB4 Out
Allows the user to switch USB hub 4 to any USB input (1through 4).
The current switch selection is highlighted. Note: Fanout is not
supported in the USB switch.
USM
5
Main Menu
Return to Main Menu
ACM
1
HP1 Volume
Allows the user to adjust headphone 1 output volume (1 through 7).