Page 2 of (2)
IMPORTANT:Turn off the power at the main fuse or circuit breaker box before staring installation
Locate all hardware & components before discarding packing
2.)
Step.2:Inset(A) glass shade into metal frame of
fixture and secure using screws on sides (2
pcs).
3.)
Step.3:Remove (B)cross bar from fixture and
install to outlet box using mounting screws on
the cross bar.
4.)
Step.4:Install bulb. See relamping label located at
socket area for type and maximum allowed
wattage.
5.)
Cleaning & Care:
Clean with soft cloth and a mild detergent.
Do not use abrasive cleaner.
(B)Cross bar
(C)Back plate with cover
(A)Fram & Glass shade
Step.5:Carefully tuck the wires into the outlet box
as you place the back plate onto the wall.
Secure fixture using finial on the protruding
screws.
Step.1:Wire fixture to wires in outlet box. Black
wire is positive, white is neutral, bare wire is
ground (Caution: Disconnect all power
before servicing).
White neutral wire
White connector
Ground wire
Black live wire
Outlet box screw
Back plate
1.)
