You will see that this file has been added to Source Group 1.
7. Configure the project options by right clicking on Target 1 in the Project Workspace window, and
select the "Options for Target 'Target 1'." Click on the Target tab, and type 14.7 into the Xtal box.
Select "Small: variables in DATA" for the Memory Model, select "Large: 64K program" for the Code
ROM Size, and select "None" for the Operating system as shown in
Figure 3
below. All other
selections in this window can be left in their default state.
8. On the Output tab, check "Create Executable" (if it is not already), and be sure that the "Create
HEX File" box is checked. Select the HEX Format of HEX-80 from the dropdown selector box, as
shown in
Figure 4
. All other selections in this window should remain in their default state. Click
"OK" to close the Options for Target 'Target 1' window.
9. Save the Project file by clicking "File" and then "Save All."
10. Create the executable file by clicking the "Project" heading and select "Rebuild All Target Files."
The build window at the bottom of the screen should indicate that there were 0 Error(s), 0
Warning(s). If not, locate the error(s) and make the necessary correction(s). Repeat this step until
no errors are reported.
Figure 3. Project options target tab settings.
Page 5 of 11
