Application Drawings
Vi3405 5-Port L2 PoE Coax Switch Installation Manual
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION
CAUTION:
TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
IP Camera-end Installation
The Smart Choice for Transmission Solutions
www.vigitron.com
Vigitron’s MaxiiNet™ Vi3405 fixed managed five port extended Coax PoE
switch brings new performance standards to the growing need for high
speed transmission of high speed Ethernet. It eliminates the need for local
power for the cameras connected to its 4 ports at extended distances. The
Vi3405 provides a 100Base-T and an SFP socket for fiber optic uplink.
The Vi3405 is powered locally by the Vi1120 to supply 802.3at to each port,
providing up to 36W (802.3at) to each port. The Vi3405 can operate over
Coax cables at extended distances up to 1,800 feet (548m) when combined
with the Vi2401A or Vi2400A.
With an operating temperature range of -30°C to 75°C, the Vi3405 is the
perfect solution for data and power transmission for warehouses, parking
lots, campuses, casinos, and many more. The Vi3405 is MegaPixel Certified
(MPC™), type tested to network packet performance standards, and major
manufacturer compatibility tested to assure you error free, quality opera-
tions. Fixed managed L2 functions include 802.1p Qos, support of 2k MAC
addressing, learning, aging, and a non-blocking switch fabric.
Installation cost savings, proven performance, and major camera manufac-
turer compatibility all go into making Vigitron’s MaxiiNet™ Vi3405 an ideal
solution for standard distance data and power transmission.
Important Safety Warning
Ethernet Switch/NVR-end Installation
- Read and keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Install in accordance with the manufacturer’s instructions.
- This installation should be made by a qualified service person and should conform to all local
codes.
- DO NOT bundle UTP or Coax signals in the same conduit as high-voltage wiring.
- To reduce the risk of fire or electrical shock, do not expose these products to rain, moisture,
dripping or splashing.
- No objects filled with liquids, such as vases, shall be placed on Vigitron equipment.
- DO NOT install the unit in a place where the operating ambient temperature exceeds 75°C or
is below - 40°C.
- Make sure that the external power supply output voltage is in the recommended range.
- Do not install near any heat sources such as radiators, heat registers, stoves or other
apparatus (including DVRs) that produce heat.
- Protect the power cord from being walked on or pinched particularly at power source,
convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as when a power supply cord or plug is damaged, liquid
has been spilled, objects have fallen inside the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has been dropped.
- The main plug is used as the disconnect device and shall remain readily operable.
WARNING! - To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture. This apparatus shall not be exposed to
dripping or splashing and no objects filled with liquids, such as vases shall
be placed on the apparatus.
WARNING! - This apparatus is a Class I product. This product must
be connected to a mains socket outlet thru an AC to DC Power supply.
WARNING! - The mains plug is used as the disconnect device and
shall remain readily operable.
Uplink Connections:
There are 2 ways to connect the Vi3405 Uplink to another network switch or
an NVR, either fiber optics or Standard UTP Ethernet. Only one of these
ports can be active at the time.
a) Standard Ethernet RJ45 connector
- Connect the Uplink RJ45 connector of the Vi3405 to a standard Cat5/6
cable of maximum 328 feet (100m). Connect the other end of the cable to
the Ethernet port of the other network switch.
b) Fiber optics
-If you want to use fiber optics first you need to insert a suitable SFP that
matches your fiber optic cable into the Uplink SFP socket of the Vi3405.
Then connect the fiber optics cable to the SFP. Connect the other end of
SFP to the optical connector of the other network switch.
Power Supply:
-Connect a power supply to the power input of Vi3405. If there is no need
for providing PoE on 4 ports, a 12VDC power supply such as Vi0012 will be
sufficient. If PoE is required at the ports you need to select a 48-57VDC
power supply such as Vi1120 that can provide maximum PoE capacity on
all 4 ports.
Extended Ethernet Ports:
- Connect a standard Cat5, or better, UTP cable of maximum 3,000 feet
(914m) to one of the Ethernet ports. The ports will automatically configure
as 10 or 100BaseT depending on the distance.
- Use an Ethernet and PoE “Extender” such as Vi2401A or Vi2400A at the
camera side.
- Connect one end of the long Coax cable to the BNC connector of Extended
port of “Extender”.
Non-PoE Switch
Connecting Cameras over combination of Coax and Fiber cables
Fiber Optic
Cat 5/6
Coax
Vi3405
Power
Supply
Vi2400A
Vi2400A
Vi2401A
IP Cameras
IP Cameras
IP Cameras
Vi2401A
The Vi3405 can be used to connect remote cameras over a combination of Coax and Fiber cables.
Data
Fiber up to 80Km
Data +
PoE
328 ft. (100m)
Data +
PoE
328 ft. (100m)
Data +
PoE
328 ft. (100m)
Data +
PoE
3,000 ft. (914m)
Data +
PoE
3,000 ft. (914m)
Data +
PoE
3,000 ft. (914m)
Data +
PoE
3,000 ft. (914m)
Data +
PoE
328 ft. (100m)
Non-PoE Switch
Connecting Cameras over combination of Coax and UTP cables
Vi3405
Power
Supply
Vi2400A
Vi2400A
Vi2401A
IP Cameras
IP Cameras
IP Cameras
Vi2401A
The Vi3405 can be used to connect remote cameras over a combination of Coax and UTP cables.
Data
328 ft. (100m)
Data +
PoE
328 ft. (100m)
Data +
PoE
328 ft. (100m)
Data +
PoE
328 ft. (100m)
Data +
PoE
3,000 ft. (914m)
Data +
PoE
3,000 ft. (914m)
Data +
PoE
3,000 ft. (914m)
Data +
PoE
3,000 ft. (914m)
Data +
PoE
328 ft. (100m)
Max
ii
Net
TM
