10/100Base-T
Made in U.S.A.
Limited Lifetime Warranty
Vigitron, Inc. warrants that all Vigitron products (“Product”), if used in accordance
with these instructions, will be free of defects in material and workmanship for
lifetime defined as the duration period of time until product end of life is announce-
ment. After which Vigitron will continue to provide warranty services for a period of 3
years. Period covering valid warranty will be determined by proof of purchase in the
form of an invoice from an authorized Vigitron dealer.
Warranty will only be provided for as long as the original end user purchaser owns
the product. Warranty is not transferrable. At Vigitron's option, defective product will
be repaired, replaced or substituted with a product of equal value. This warranty
does not apply if, in the judgment of Vigitron, Inc., the Product fails due to damage
from shipment, handling, storage, accident, abuse or misuse, or if it has been used
or maintained not conforming to Product manual instructions, has been modified, or
serial number removed or defaced. Repair by anyone other than Vigitron, Inc. or an
approved agent will void this warranty. Vigitron, Inc. shall not under any circum-
stances be liable to any person for any incidental, indirect or consequential
damages, including damages resulting from use or malfunction of the product, loss
of profits or revenues or costs of replacement goods. The maximum liability of
Vigitron, Inc. under this warranty is limited to the original purchase price of the
Product only.
Technical Specifications*
RoHS
Drawings
Electrical
Ethernet Interface Standard 10/100BaseT
Ethernet Rate
Dip switch selectable 10/100 Mb/s
UTP**
100 Ohm, 3000 ft (914 m) at 10BaseT 802.3 af
800 ft (640 m) at 100BaseT 802.3 at
Power Supply
12 VDC / 24 VAC, 150 mA maximum
1.5 W with external power supply
2.5 W when used with PoE.
Connectors
Ethernet Interface: RJ-45 Connector
Extended Interface: RJ-45 Connector
Power: IEC380-8 inlet
Environmental
Humidity
0 to 95%, non-condensing
Temperature
Operating: -40°C to +75°C
Storage: -40°C to +85°C
Mechanical
Dimensions
1.15x1.6x3.15 in., 3.0x4.0x8.0 cm (HxWxL)
Weight
0.212 lb, 96 g
Material
Extruded Aluminum
Accessories
12 VDC wall-mount power supply (optional)
*Specifications subject to change without notice.
**Distance figures are obtained using in house testing mirroring installations. Factors such as cabling, connections,
use of power and environmental conditions may affect actual distances and should be taken into consideration.
Ordering Information
Right View
PART No.
Description
Vi2301 Single port UTP Ethernet Extender
Vi2304 4-port UTP Ethernet Extender
Vi2308 8-port UTP Ethernet Extender, 19”, 1U
Vi2316 16-port UTP Ethernet Extender,19”, 1U
Vi2301
High Speed Ethernet Extender
over UTP
www.vigitron.com
1.15"
3 cm
1.6"
4 cm
Top View
Left View
On
Off
Extended
Ethernet
S1 S2 S3
Off:Slave
On:Master
S2
{
Off:10Base-T
On:100Base-T
S1
{
Off:4-Pairs
On:1-Pair
S3
{
Status LEDs
On
Off
Extended
Ethernet
S1 S2 S3
Off:Slave
On:Master
S2
{
Off:10Base-T
On:100Base-T
S1
{
Off:4-Pairs
On:1-Pair
S3
{
© Copyright 2012 Vigitron, Inc.
TEL (+1) 858 - 484 -
5209 • FAX (+1) 858
- 484 - 1205
7810 Trade Street, Suite 100, San Diego, CA 92121, USA • [email protected] • www.vigitron.com
Vi2301_Instruction Manual
10/100Base-T
Made in U.S.A.
Traffic
Link
12V /24V
Traffic
Link
12V /24V
Power
LED Name
Color
Status
Function
OFF
Power is OFF
ON
Power is ON
OFF
No Traffic
FLASHING Traffic
GREEN
ON
Connection is OK, 10BaseT Mode
ORANGE
ON
Connection is OK, 100BaseT Mode
OFF
No connection
FLASHING Connection is OK with Traffic
OFF
No connection
ON
Connection is OK
Link
(Standard Side)
Power
RED
Traffic
(Extended Side)
YELLOW
10/100 BaseT
(Extended Side)
Traffic
(Standard Side)
GREEN
YELLOW
3.73"
9.5 cm
Ethernet Switch/NVR-end Installation
(Cont.)
- If the Vi2301 recieves power using POE, make certain the power adapter
is not connected.
- If a PSE source such as a POE network switch is not available, external
power must be provided to the Vi2301
CAUTION:
- If the external power adaptor is connected with no power applied, the
Vi2301 will not reference to a PoE source and the system will be
inoperative
- If PoE is used as the main camera power source and power is lost, power
applied to the Vi2301 may have to be recycled.
- 4-pair is not valid for 10 BaseT PoE.
-802.3 at requires PSE operation in forced mode.
