BEFORE USING YOUR KETTLE
…
Remove all packaging materials before using. Wipe clean the interior and exterior of
the machine with a damp cloth
When using the kettle for the first time, it is recommended that you clean your kettle
before use by boiling a full kettle of water twice and then discarding the water.
OPERATION OF YOUR KETTLE
…
1. To fill water kettle, remove it from the power base and open lid.
2. Always fill the kettle between the minimum 4-cups (0.5L) and maximum 10-
cups (1.7L) mark. Too little water will result in the kettle switching off before
the water has boiled.
NOTE: Do not fill the water over the maximum level, as water may spill out of
the spout when boiling. Ensure that the lid is firmly in place before
connecting
the power cord to the outlet.
3. Position the kettle on the power base.
4. Connect the plug into a power outlet. Press the switch button below the
handle. The indicating light will light up. Then start to boil the water. The
kettle will switch off automatically once the water has boiled. You can shut
off the power by pressing the switch button at any moment during the boiling
process.
NOTE: Ensure that the switch is clear of obstructions and the lid is firmly
closed. The kettle will not turn off if the switch is constrained or if the lid is left
open.
5. Lift the kettle from the power base and then pour the water.
NOTE: Operate carefully when pouring the water from your kettle as boiling
water will scald.
6. The kettle will not re-boil until the switch is uplifted. Allow to cool for 15~20
seconds before reopening to boil water. The kettle may be stored on the
power base when not in use.
NOTE: Ensure power supply is turned off when kettle is not in use.
Should you accidentally allow the kettle to operate without water, the boil-dry
protection will automatically switch it off. If this should occur, allow the kettle to cool
before filling with cold water and re-boiling.
CARE AND CLEANING
…
Always disconnect the appliance from the power outlet before cleaning.
Never immerse the base area or cord in water, or allow moisture to contact with these
parts.
Removal of mineral deposits
Mineral deposits in tap water may cause the kettle interior to discolor .To remove this
build-up, use Liquid De-scaler, a simple to use, non-toxic cleaner.
Alternatively:
1. Fill the kettle with 3 cups of white vinegar and the remainder with water and be
allowed to stand overnight.
DO NOT BOIL!
2. Empty the solution from the kettle, any stains remaining inside the spout can be
removed by rubbing with a damp cloth. Fill the kettle with clean water, bring to boil
and then discard the water. Repeat and the kettle will then be ready to use.
The outside of the kettle can be wiped over with a damp cloth.
Cleaning appearance of housing
Wipe the appearance of housing with a damp cloth or cleaner, never use a poisonous
cleaner.
