parc
Play Yard
4
Assembly
IMPORTANT NOTE: Review the
Changing Station on pages i-1.
7a
E
D
B
C
C
A
Changer frames (one with
lever)
Changer cross tube
Changer pivots (2)
Changer clamp arms (2)
Changer fabric
A
B
C
E
D
7
Lever
Lever
Side slots
Front opening
Front opening
Clips
7e
7d
WARNING:
Child should be removed from the
product prior to installation, set
up and before adjusting changing
station to the in use position.
2
Changing Station
Assembly
Over view
: Parts will be assembled
as shown. See Figure 7 to identify
parts.
Slide two
changer frames
A
into
fabric pockets with the lever on the
side shown (Figure 7a).
Connect
frames together at front center opening
until pin clicks (Figure 7b). Then,
position the lever through opening at
front center of fabric (Figures 7a, 7c)
and the connectors through slot in
each side (Figure 7c).
Position
cross tube
B
with pins
facing down. Slide cross tube inside
fabric pocket and connect pin at each
side (Figure 7d).
Position
changer pivots
C
(as shown
in Figure 7e) into connectors at sides
of changer and press pivots into
connectors until pins click.
NOTE: Match pivot A with connector
A and pivot B with connector B.
NOTE:
Changer can be attached to
either long side of play yard.
7b
Lever
Connectors
7c
