Maxi Comfort Oasis Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 24

Maxi Comfort Oasis Скачать руководство пользователя страница 20

PAGE 18

CARE & MAINTENANCE

Your MaxiComfort Lift Chair will require routine maintenance checks. You can
perform some of these checks, but others may require assistance from an
authorised MaxiComfort Dealer. By following the maintenance checks in this
section as scheduled, you can help ensure your lift chair gives you years of
trouble-free operation. If you have any questions regarding your lift chair’s care,
contact your authorised MaxiComfort Dealer.

FABRIC CARE

• Inspect the fabric on a regular basis for any pulls, tears or gaps
• Fabric care instructions can be found on the tag under the headrest cushion.

Fabric should not be allowed to come in direct contact with any type of heat
source (e.g., a space heater or cigarette). Personal injury or fire damage may occur.

It is strongly recommended that you do not smoke cigarettes while seated in
or using your lift chair, although the lift chair has passed the necessary testing
requirements for cigarette smoking. You must adhere to the following safety
guidelines if you decide to smoke cigarettes while seated in or using your lift chair.

•   Do not leave lit cigarettes unattended.
•   Keep ashtrays a safe distance from the lift chair.
•   Always make sure cigarettes are completely extinguished before disposal.

Do not use solvent-type cleaners to spot clean. Do not saturate the fabric. Prevent
damage to the fabric; do not expose the lift chair to direct sunlight.

«
...
18
19
20
21
22
...
»

Содержание Oasis

























Отзывы:

Нет отзывов