Copyright Maxford USA 2017
Page 6
of 14
S171108
damage, or wrongful death, and if you (the buyer or user of this product) are involved in any claim or suit,
you will not sue Maxford USA or any of its representatives.
If you do not fully accept the above liability and waiver, you may request a return-merchandise
authorization number (RMA#) as explained below in item 2. If you think there is a missing, damaged or
unsatisfactory part, please read the following after-sales service and return policy and instructions.
1.
Inspect your order upon delivery for any missing, damaged or unsatisfactory part(s). If you believe
there is a problem, you must call us at 562-529-3988 (Monday through Friday except holidays,
between the hours of 9 AM and 5 PM Pacific time) before you begin assembly and within 10 days from
receipt of your purchase. During this telephone conversation, and with your support, we will
determine how to resolve your concern.
2.
To request a return-merchandise authorization number (RMA#), call 562-529-3988 (Monday through
Friday except holidays, between the hours of 9 AM and 5 PM Pacific Time). If we elect to issue you an
RMA#, you must clearly mark this RMA# on the outside of the package. (No return or exchange will be
authorized after 10 days from the date of your receipt of the product; any package delivered to us
without a Maxford USA RMA# is subject to being returned to the sender, as received, with return
postage payable upon delivery.) Returned merchandise must be in its original condition as received
from Maxford USA, with no assembly or modification, in the product’s original packing materials,
complete with any included printed materials, manuals and accessories. Return shipping and
insurance charges must be prepaid by you, the buyer.
3.
Returned merchandise that is accepted by Maxford USA for credit is subject to a 10% to 20%
restocking fee (the final amount will be determined by Maxford USA upon receipt and examination of
the returned merchandise).
Return address:
Maxford USA
15939 Illinois Avenue, #B-C
Paramount, CA 90723
I
MPORTANT
: Print the RMA# issued by Maxford USA
on your package
near our address.
IX. PHOTO INSTRUCTIONS
AND ASSEMBLY NOTES
Test-fit the aileron servos into their openings in the bottom of each wing panel.
When satisfied with their fit, connect and secure the aileron servo’s leads to their
extensions with optional servo-extension safety clips, then guide the aileron
servo’s leads and extensions from each of the aileron servo openings and out
behind the wing rods, through the openings in each wing panel’s root rib.
Install the aileron servos using
their supplied hardware.
Install the aileron control horns.
Insert the supplied CA hinges into
the precut slots in the ailerons
and trailing edge of each wing
panel, then glue the hinges
permanently in place with CA adhesive.
Center the aileron servos.
While holding the ailerons at ‘neutral,’
install the aileron pushrods.
Once the clevises are correctly
adjusted, secure each clevis to its
pushrod with epoxy, CA adhesive or
threadlock compound.
(NOTE: Included hardware may vary from what is
pictured throughout this instruction manual.)
