Page
5
of
13
5- and 30-minute epoxy glue, thin and thick Cyanoacrylate (CA) adhesives,
and a few common hand tools (such as long-nosed and diagonal or side-cutter
pliers, Phillips screwdriver, etc.).
A 50cc gas engine or equivalent glow engine or electric power system.
Propeller as recommend by your power system.
8 standard size servos or 7 servos for electric set up, servo extensions,
and Y
cables
.
Minimum 5-channel radio control system.
2. Items included with this An-2 ARF
Precovered fuselage, wing panels, rudder, horizontal stabilizer and elevators.
Pre-painted fiberglass cowl with dummy engine.
Fully assembled wheels.
Precut hinge openings and all required hinges.
Aileron, flap, rudder and elevator pushrods and related linkages.
Wing joiner tubes, all required control horns, and all related hardware (except
those items normally supplied with servos and the electric motor).
Flying wires and all related hardware.
ASSEMBLY INSTRUCTIONS
BEFORE YOU START:
Open the box and look over the parts. Check everything against the parts list and
make sure everything is there and undamaged. If anything is missing or broken,
contact your dealer within 10 days of receipt of the kit
