Maxent MX-42X3, Руководство пользователя, Страница: 19 / 25

19
Display Connections
Connecting a Subwoofer
This monitor is equipped with a subwoofer output for connecting to an external amplified subwoofer.
Connecting a PC
Using RGB or HDMI Video Input
Audio (3.5 mm Mini-Stereo to RCA
cable)
RGB cable
(15 Pin D-Sub)
Connect a RCA cable from the subwoofer’s
input to the subwoofer’s output jack on the
back of the monitor.
Notes:
„
The RCA subwoofer outputs frequencies
below 120Hz.
„
The subwoofer output jack is governed by
FIXED or VARIABLE audio output setting
and works in conjunction with AUDIO OUT
jacks.
Connect the red (R) and white (L) audio jacks
from the PC to the R and L jacks located next
to the RGB connector.
For most PCs, connect the 15-pin D-Sub RGB
connector from the back of the PC to the RGB-
IN Connector located on the back of the
monitor.
Note:
„
A RGB loop-out labeled RGB Out will allow
another RGB monitor to be connected. The RGB
loop-out will display the same signal as the RGB
In signal source.
„
If the external device has DVI output only, use a
DVI to HDMI adapter cable to connect to the
HDMI terminal. (See below picture)
Audio (3.5 mm Mini-Stereo to RCA
cable)
DVI/HDMI Adapter