Maxent MX-27X1, Руководство пользователя

Страница: 52 / 95

52
Power Save Mode
.
Setting Power Save Mode Using OSD Menu
This monitor is equipped with a Power Save mode under RGB or DVI input modes. When there are no signals
detected by the monitor, the monitor will automatically go into sleep mode until signal is restored.
System Passcode
Press the on the front panel or remote
control. Use to select the SETUP
option from the menu and press key to
confirm selection.
.
Setting System Passcode
The system passcode setting is used in conjunction with V-Chip (Parental Guide) and Channel Lock functions.
The same security passcode is used for both functionality. By default, this monitor is shipped with the security
passcode set at 0000.
Advanced Functions
Press the on the front panel or remote
control. Use to select the SETUP
option from the menu and press key to
confirm selection.
A small display window appears upon selecting
the selection. Use to select the desired
amount of time for power down after a signal is
no longer detected. Available settings are:
1MIN, 2MIN, 3MIN, 4MIN and 5MIN. Press
key to confirm setting and return to
previous menu.
Various SETUP settings are available from the
SETUP menu. Use
to select the
POWER SAVE option. Press key to
confirm selection.
Note:
! To turn on monitor from sleep mode, simply follow Power On procedure.