![Maxell MP-TW3001 Скачать руководство пользователя страница 17](http://html1.mh-extra.com/html/maxell/mp-tw3001/mp-tw3001_user-manual_1743542017.webp)
17
(1*/,6+
Installing or replacing the internal clock battery
This product has an internal clock. When you use the function that requires the
internal clock (
"Event Scheduling" in the
Network Guide
), install a new battery.
If the internal clock starts to malfunction, try to replace the battery.
Use the following type of battery, and follow the steps below.
MAXELL, Part No.
CR2032
or
CR2032H
1.
Turn the projector off, and unplug the power cord.
$OORZWKHSURMHFWRUWRFRROVXI¿FLHQWO\
2.
Turn the battery cover fully counterclockwise using a
coin or the like, and pick the cover up to remove it.
3.
4.
3U\XSWKHROGEDWWHU\XVLQJDÀDWKHDGVFUHZGULYHU
or the like to take it out. Do not use any metal tools.
:KLOHSU\LQJLWXSSXWD¿QJHUOLJKWO\RQWKHEDWWHU\
since it may pop out of the holder.
5.
Install a new battery in place.
Slide the battery in under the plastic claw, and push
it into the holder until it clicks.
Replace the battery cover in place, then turn it
clockwise
WR¿[E\XVLQJDFRLQRUWKHOLNH
90°
90°
%DWWHU\&RYHU
Always handle the batteries with care and use them only as
GLUHFWHG%DWWHU\PD\H[SORGHLIPLVWUHDWHG'RQRWUHFKDUJHGLVDVVHPEOHRU
GLVSRVHRILQ¿UH$QGDOVRLPSURSHUXVHPD\UHVXOWLQFUDFNLQJRUOHDNDJHZKLFK
FRXOGUHVXOWLQ¿UHLQMXU\DQGRUSROOXWLRQRIWKHVXUURXQGLQJHQYLURQPHQW
'RQRWLQJHVWEDWWHU\&KHPLFDO%XUQ+D]DUG
It can cause severe internal burns in just 2 hours and can lead to death.
Ź
If you think batteries might have been swallowed or placed inside any part of
the body, seek immediate medical attention.
- Keep new and used batteries away from children and pets. If the battery
compartment does not close securely, stop using the product and keep it away
from children and pets.
Ź
If you observe battery leakage, wipe out the leakage and then replace a battery.
If the leakage adheres to your body or clothes, rinse well with water immediately.
Ź%HVXUHWRXVHRQO\WKHVSHFL¿HGEDWWHULHV
- Do not use damaged batteries.
- Do not use any metal tools.
- Make sure the plus and minus terminals are correctly aligned when loading a
battery.
- Do not short circuit or solder a battery.
Ź 'RQRWDOORZDEDWWHU\LQD¿UHRUZDWHU.HHSEDWWHULHVLQDGDUNFRRODQGGU\SODFH
Ź
Obey the local laws on disposing a battery.
WARNING
Содержание MP-TW3001
Страница 22: ......