9
Never carry out maintenance during charging and ensure power supply is off before carrying out
maintenance. If you carry out maintenance during charging or when the power supply is on, it may
cause electric shock.
●
The gel pad may peel off depending on the usage conditions, storage environment or insufficient
maintenance.
●
Frequent use and maintenance will reduce the adhesiveness and the
longevity of gel pads.
●
Never stick the gel pads together. Place the protective films on
the adhesive side of the pads and store properly.
●
Please be aware that we are not liable
for any trouble caused by using non-original gel pads.
• This product is not waterproof. Please make sure that the control panel of the main unit and input
terminal are not exposed to water.
• Do not wipe with chemicals such as benzine, thinner or alcohol.
• If the product is used without being cleaned or stored for a long period of time, the electrodes may
darken. Regular maintenance is recommended.
When the adhesiveness of the gel pads is significantly
reduced after continuous use and maintenance,
replacement gel pad (sold separately) shown on the
right.
Storage
Maintenace
5
Caution
Caution
1
2
3
MXES-GELB4S (1 set Pack)
MXES-GELB8S (2 set Pack)
Maintenance of Device
Maintenance of Gel Pad
Dip your finger tip in water and wipe away the dirt on the adhesive side.
Wipe away the water, place the adhesive side on top and dry in a cool, well
ventilated location.
Ensure there is no water left and cover with the protective film.
• Please use dry and soft cloth to wipe away the dirt on the device.
• For severe dirt, please use damp soft cloth to wipe away the dirt on the device gently. Please
squeeze out water from wet cloth before wiping.
• Clean the gel pad according to “Maintenance of the Gel Pad”.
• After use, wipe off sweat and moisture, and attach the main unit on a storage sheet for storage.
• If the product is left without wiping off sweat or moisture, the product life may be shortened.
• Make sure that the power is not turned on, and store it away from high temperatures, high humidity,
direct sunlight and dusty places.
• Do not store the unit using anything other than a protective sheet. If you use other paper, it will not be
removed.
• Please keep in mind that if they are stored for a long period of time with heavy objects on them, the
fitting belt may have permanent folds or wrinkles.
• When not using the product for a long period of time, please charge the product before storing it.
Furthermore, please charge the battery every 3 months. Otherwise the battery may deteriorate and
the product will become unusable.
Please follow the steps below to clean the adhesive side of the gel pads.
Gel pads are consumable parts.
Replacement Gel Pad
