9
MAXDATA Server PLATINUM 1500 IR M6
Standard Control Panel
The diagram below shows the features available on the Standard Control Panel. The Standard Control
Panel is one of two required control options that can be selected. The other option is the Local Control
Panel.
Figure 2. Standard Control Panel
Table 2. Standard Control Panel Features
Callout
Feature
Function
A.
NIC 2 activity LED
Continuous green light indicates a link between the system
and the network to which it is connected.
Blinking green light indicates network activity.
B.
NIC 1 activity LED
C.
Power/Sleep button
Toggles the system power on/off. Sleep button for ACPI
compatible operating systems.
D.
Power/Sleep LED
Continuous green light indicates the system has power
applied to it. Blinking green indicates the system is in S1
sleep state.
No light indicates the power is off / is in ACPI S4 or S5 state.
E.
Hard disk drive activity
LED
Random blinking green light indicates hard disk drive activity
(SCSI or SATA).
No light indicates no hard disk drive activity.
F.
System Fault LED
Solid green indicates normal operation
Blinking green indicates degraded performance
Solid amber indicates a critical or non-recoverable condition
Blinking amber indicates a non-critical condition
No light indicates POST is running or the system is off.
G.
System Identification LED
Solid blue indicates system identification is active
No light indicates system identification is not activated
H.
System Identification
button
Toggles the front panel ID LED and the baseboard ID LED
on and off. The baseboard LED is visible from the rear of the
chassis and allows you to locate the server from the rear of a
rack of systems.
I.
Reset button
Reboots and initializes the system.
J.
USB 2.0 port
Allows you to attach a USB component to the front of the
chassis.
K.
NMI button
Puts the server in a halt-state for diagnostic purposes.
L.
Video port
Allows you to attach a video monitor to the front of the
chassis. The front and rear video ports cannot be used at the
same time.
