manualshive.com logo in svg

MAXDATA M-Book 6000, Руководство пользователя

Поделиться
Скачать
MAXDATA M-Book 6000 Скачать руководство пользователя страница 36

1 - 14 3.75G/HSPA Module USIM Card Installation

Quick Start Guide

1

3.75G/HSPA Module USIM Card Installation

If you have included an optional 3.75G/HSPA module in your purchase option, follow the instructions below to
install the USIM card (which will be provided by your service provider), and then run the 

Mobile Partner

 ap-

plication. See 

“Mobile Partner” on page 7 - 23

 for instructions on installing the program etc. 

1.

Turn 

off

 the computer, and turn it over and then remove the battery (slide the latches in the direction indicated 

below and slide the battery out).

2.

Insert the USIM card into the slot at the rear of the battery compartment, as illustrated below, until it clicks fully 
into position, and replace the battery.

Figure 1 - 7 - Battery Removal & USIM Card Insertion

USIM Card Orientation

Note that the USIM card’s readable
side (with the gold-colored contacts)
should face upwards as illustrated.

Содержание M-Book 6000











































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды