81
MAXDATA Notebook ECO 4100 IE
UK
Installation Instructions
Restoring the Drivers
Your system is supplied in a preloaded condition. This means that all the data and drivers
that the system requires are already on the hard disk. In case you erase and/or format your
hard disk drive, the system drivers are stored on the Utility CD supplied with the computer.
After reinstalling the operating system (for example, with the Recovery CD), this allows you
to restore your notebook to a usable condition.
The Utility CD
The Utility CD will run automatically after you place it in the drive. If this is not the case,
you can run the CD as follows: select <My Computer”> <CD Drive> and then the “utility.
exe” file.
You can select the driver that you want to install in the “Drivers” section. Recommended:
Install all listed drivers from top to bottom.
In addition, you can later install the advanced functions you require in the “Utility” sec-
tion.
When using the Utility CD, please follow the menu instructions.
Setting the Resolution
After installation of the graphics driver, you can set the resolution to the desired size (e.g.
1024 × 768).
You do this in the following way:
Right-click on any free area of the desktop. Select <Properties>.
In the Display Properties window, click the Settings tab.
Here you can set the slider to a resolution you find comfortable.
Click <Apply> to set the resolution.
Note on the infrared interface
Before using the infrared interface for the first time, the device must be activated in the
system BIOS.
Activate the infrared interface as follows:
(1) During system start up, press the F2 key to enter the system BIOS menu.
(2) Use the arrow keys to navigate to the menu item “Security” and select the subitem
“
►
I/O Interface Security” using the “Enter” key.
(3) In the following menu, use the “Enter” key to confirm the “Infrared Interface” option
and select the setting “unlocked”.
(4) Press the F10 key to save this setting and exit the system BIOS menu.
