8
C.
Install antenna
Screw the head from the antenna on the device (antenna connector). Do not
put the two too close.
D.
Connect the telephone and the device (any one phone jack). Place the phone
set away from the antenna to avoid interference.
E.
If you want to use a billing meter, connect it with the telephone and the
device. For connection to a user PBX, connect it with the device by trunks.
F.
Attach the lead from the adapter carefully to any one of the power-socket on
the back of the device. Connect the power adapter to an AC 120V outlet.
G.
Switching on, and then the device startup, it will enter into work state after
searching for network.
H.
Make sure that the device is currently in service. If the signal strength is
very lower, maybe the network is currently not available. You may be in a
bad reception area. If possible, move the machine to a different location.
6. How to use
6.1. Making Calls
1.
Connecting a normal telephone with telephone cable to the Fixed
Wireless Terminal’s RJ11 phone port. Take up the handset of the phone
and a dialing tone will be heard. Dial phone number from keypad of
telephone.
2.
In order to shorten the network access time, you can dial the [#] key as a
