Maxcom MM901, Руководство пользователя

Страница: 13 / 48

13
remove the battery,
2
Slide the card pin to your left, and lift up the released end of
the card .
3
Insert the memory card with the metal connectors face
downward (pay close attention to notches)
4
Close the memory card holder by sliding the pin to your right.
Be careful while using the memory card particularly while installing
and uninstalling the card. Some memory cards shall be formatted
on the computer prior to an initial use.
If you use SD cards, regularly make backup copies of any data
stored on cards in other devices! Misuse of the card or other
factors might cause damage or loss of entire data stored on the
card.
5.3 Battery Installation:
1. Unscrew the screw on the back of your phone on the
battery cover,
2. Lift up the back cover from the bottom either on the right
or left side,
3. Insert the battery with the metal connectors facing
downwards,
4. Replace the back cover by placing it flat on the back of
the phone and push it up until it clicks into place,
5. Screw the screw back on the battery cover.
5.4 Remove the Battery
Switch off the phone. Unscrew the screw on the back of the phone,
slightly lift up the back cover either from right or left side, and
remove the battery.
After removing the battery, any settings and data saved on the
card or on the phone might be lost. Remove the battery only while
the phone is switched off. Doing otherwise might cause the phone