Maxcom MM818, Руководство пользователя

Страница: 20 / 56

20
8 U
SING
T
HE
P
HONE
8.1 S
WITCHING
O
N
/O
FF THE
P
HONE
Press and hold the End Call key (red receiver key) to switch on
and off the phone.
1. If there is only a single SIM card, a text input field
appear on the LCD for you to enter the phone and the
PIN codes (if security is enabled). As soon as you
enter the PIN code and the phone code, the phone will
go into standby mode for a given SIM card.
2. If there are two SIM cards in the phone (up to security
settings), a text input field might appear on the LCD for
you to enter either the SIM1 PIN or SIM2 PIN codes (if
security is enabled). You will be prompted to enter one
code after another.
If you make an error while entering the PIN code and the phone
code, you might have it deleted by pressing the RFK (right
function key).
As soon as the phone is switched on, it automatically searches
for a network(s).
If the phone detects an authorized network, the name of the
network and signal strength will be displayed on the LCD. If no
network is detected, the phone might be used for emergency
calls only or for non-communication purposes.
8.2 M
AKING
P
HONE
C
ALLS
In Idle mode, dial the phone number you wish to call.
Press the Right Function K
ey “Delete” to delete any
letters/numbers you might have entered by mistake. If there a
single SIM card on the phone, press the green receiver key to
make a phone call.