8
know the secret code in order to dial through the line.
TRANSFER BETWEEN PARALLEL PHONES
Setting paging number
1. In on-hook state, press and hold
SET
key, LCD displays
EL--
2. Key i
n “
*
” and the paging number (example “
*1
” and “
*2
” ), use
DEL
key to edit
3. Press
SET
key to confirm and exit.
Transferring the line from paralleled phones
When a call comes, use one of paralleled phones to answer. Press
“
*
” and the paging number
that was set in another telephone unit, the unit rings, pick up its handset or press
key to
answer the incoming call.
NOTE: Please use same series phones to transfer as above operation. Any special
services starting with “
*
” offered by your Telephone company may not function properly.
To get the best effect of this function, you should load the batteries before using.
ANTI-DIALING FROM PARALLEL PHONES FUNCTION
1. In on-hook state, press and hold
#/=
key for 3 seconds, LCD displays
SPI ON
2. Press
key twice and then
3. Press and hold
#/=
key for 3 seconds again, LCD displays
SPI OFF
When the anti-steal dialing is set to ON, users who want to dial using an extension via the same
line will hear a “DI-DI, DI-DI” beep continuously and will not be allowed to make a call.
SETTING RINGING TONE AND ADJUST RINGING VOLUME
There are 16 kinds of ringing tone and ringing OFF for selection:
1. In on-hook state, press
RING
key, LCD displays
ring 02 db8
2. Press
RING
to select the desired ringing or set ring OFF.
3. Press
UP/+
or
DOWN/
–
key to set ringing volume.
4. Press
SET
to confirm and exit.
NOTE:
The volume ranges from 1db-8db
, with 8db being the loudest. Ring OFF is “
Do Not
Disturb
” mode. If the phone is set to this mode, the telephone will not ring when there is an
incoming call.
ADJUST HANDSFREE VOLUME
In hands free mode, press
UP/+
or
DOWN/
–
to adjust the handsfree volume, LCD displays the
volume level and there are a total of 4 levels.
SELECTING PULSE OR TONE DIALING MODE
1. In on-hook state, press and hold
*/.
key for 3 seconds, LCD displays
P
, then dialing mode
is set as Pulse.
2. Press
key twice and hold
*/.
key for 3 seconds again, LCD displays
T
, then dialing
Содержание KXT-709
Страница 3: ...3 LOCATION DESCRIPTION ...
