ENGLISH
8
Connect the cable to the socket swivel the handset (16), the
other end of the torsion connect to the socket on the left side of the base
(15)
Insert the telephone cord into the socket on the back of the
phone (19). The other end of the cable into the wall outlet. Both ends are
terminated with RJ plug and connect to that telephone is suitable. If you
have another outlet, make sure you have the appropriate adapter.
Connect the power adapter cable into the socket on the base
(18).
Before opening the battery cover, make sure that the phone is disconnected
from the power supply and telephone line.
NOTE:
Batteries are not supplied phone
Do not use different types of batteries.
Do not use rechargeable batteries
When the display appears
, Change the batteries. For safety reasons,
the phone will be locked when the battery voltage drops below 2.5V.
Turns off the screen and all functions except basic. Making and receiving
calls will still work. After replacing the battery, connect the power adapter
will run display and disappears . When Replacing the battery,
disconnect the telephone line cord and AC
7
CHANGING THE BATTERIES IN THE REMOTE SOS PENDANT
Remote SOS is powered by 12V 23A battery (installed). Every time the red
SOS button on the remote control is pressed, lights up the red LED to
indicate the correct transmission. If the LED is not lit, replace the battery in
the remote control with new ones.
Used batteries are harmful to the environment. Should be stored in
specially designated point in a suitable container in accordance
with local regulations. Do not throw batteries into the trash.
8
PHONE SETTINGS
In standby mode, press MENU appears on the LCD Contrast. Then use the
keys or To navigate the menu:
TIME / DATE NUMBER → → SAVE REC. NAME → REC. VIEWS PRESS
PRESS → → → MENU LANGUAGE PODPOW. FLASH VOICE → → →
MODE DIAL room. REMOTE → NO WAY.
If you want to enter the settings displayed on the screen, press the OK /
DIAL. Press DEL to go back to the menu one item. If you want to completely
exit the menu to the standby mode, press CID / ESC.