5.3. SPYDER PARAMETER TYPES
Calibration parameters
- these values are dependent on Spyder hardware. These include sensor calibration,
input / output calibrations, etc. These parameters are only valid for the Spyder from which they were received.
Data parameters
- these values are not dependent on Spyder hardware. These include Stop Time, Start Time,
Tension Units, etc. Data parameters may be sent to any Spyder to create a copy of a Spyder.
The Spyder web page shows whether a parameter is a Data or Calibration parameter. The Spyder user manual
also shows whether a parameter is a Data or Calibration parameter and additionally shows the minimum and
maximum of each parameter.
5.4. SAVE SPYDER PARAMETERS TO A FILE
Press the "Spyder to PC" button to transfer parameters to a file. A file dialog box will be displayed to choose the
file. All of a Spyder's parameters are saved in the file. A "Transfer Complete" message box will be displayed if no
errors occurred.
5.5. GET SPYDER PARAMETERS FROM A FILE
Select the type of parameters to transfer either Data Only, Calibration Only, or both Data and Calibration. Press
the "PC to Spyder" button to transfer the parameters to the Spyder. A file dialog box will be displayed to choose
the file containing the parameters. A "Transfer Complete" message box will be displayed if no errors occurred.
6.
TROUBLESHOOTING
Problem
Possible Cause
Solution or Diagnostic
Spyder List is blank.
Computer or Spyder
network parameters not
set properly.
Check Computer and Spyder
network parameters, IP Address
and Subnet Mask. Cycle Spyder
power after changing network
parameters. Restart Windows
operating system.
Missed refresh of list.
Wait 10 seconds for list to refresh
after the Spyder has booted.
Ethernet cable not
connected or hub/switch
not powered.
Check Ethernet connection(s).
Spyder(s) not powered.
Computer ARP table
corrupt.
Verify Spyder(s) have power.
From a DOS prompt type:
arp -d
Transfer Failed
Spyder not in Hold or
Manual or Security is Set.
Put Spyder in Hold or Manual.
Unsecure the Spyder.
NORTH, CENTRAL
AND SOUTH AMERICA
Tel +1.360.834.2345
Fax +1.360.834.5865
sales@maxcessintl.com
www.maxcessintl.com
EUROPE, MIDDLE EAST
AND AFRICA
Tel +49.6195.7002.0
Fax +49.6195.7002.933
sales@maxcess.eu
www.maxcess.eu
CHINA
Tel +86.756.881.9398
Fax +86.756.881.9393
info@maxcessintl.com.cn
www.maxcessintl.com.cn
INDIA
Tel +91.22.27602633
Fax +91.22.27602634
india@maxcessintl.com
www.maxcess.in
JAPAN
Tel +81.43.421.1622
Fax +81.43.421.2895
japan@maxcessintl.com
www.maxcess.jp
KOREA, TAIWAN,
AND SE ASIA
Tel +65.9620.3883
Fax +65.6235.4818
asia@maxcessintl.com
© 2013 Maxcess