4-11
INSTALLATION
www.maxcessintl.com
MAGPOWR TLC-B
MI 850A356 1 A
Bearing
and shaft installation
Outside machine frame mounting – continued
7.
Ensure the overload pins are in place and
reinstall the outboard cover.
8.
Fasten the load cell to the machine frame
using customer provided fasteners.
Minimum fastener length is 70 mm
[2.75 inches].
Repeat the procedure at the other end of the shaft.
To maintain the axial play required for thermal expansion, do not install the two
large retaining rings in the other load cell.
