P.31
1. Please do not use organic reagent or grease solution, especially strong solvent, e.g.
alcohol, turpentine and thinner, to clean the surface of the PU leather. Otherwise it will
corrode the surface.
2. Please do not use water or washing powder to clean the surface of the PU leather.
Otherwise there will be cracks.
3. When cleaning the surface of the PU leather, choose a cleaning agent that has a pH
value of between 5~7, no dentifrice, and is harmless to the environment.
4. For dirty PU surface, apply egg whites to the surface using a piece of soft cloth. Avoid
using a brush for cleaning.
Cleaning
1. Keep a good ventilation indoor, overly dry or humid environment can accelerate the
aging of leather
2. Please keep the product away from direct sunlight or air vent, otherwise the leather will
be hardened. Direct sunlight will also cause fading.
3. People are generally sweatier in summer. The holes on the surface of the leather will
absorb sweat. While heat and high humidity prompt the chemical reaction between
certain substances in sweat and the leather, and hence, causes smell. Please clean the
surface more often with a piece of lightly wet cloth.
4. Please do not use alkaline cleaning agents on the leather. It will adversely affect the
elasticity of the leather and lead to cracks as a result.
Maintenance
Maintenance and Cleaning of PU Leather
PU leather is made by the coating and drying of polyurethane. Compared with genuine
leather, PU leather is more resistant to tear, heat and sunlight. Depending on its nature
and chemical substances, however, it should be kept away fromany dusty, high/low-tem-
perature, humid environment, under direct sunlight or places with corrosive substance.
Otherwise, the leather could tear, quickening aging and hydrolysis.
FAQs and Solutions
?
No.
Symptoms
Possible Causes
Solution
1
If the abnormal situations persist after taking the above solutions, please contact us.
“Tik tik” or “tak tak”
sound during
motion
Normal mechanical sound
during motion or the frictional
sound between the massage
balls and cover
No action needed
2
Cannot be
turned on
The adapter has not been well
connected
The power switch is off
The power plug has not been well
connected
Connect the adapter
properly
Switch on the power
button
Connect the plug to the
socket properly
3
Abrupt stop during
operation
Power disconnected
Rated working time (20 minutes)
is up and sleep mode is on
The machine has been in use for
too long, causing overheating
protection
The massage hands are stuck
Check if the power cord
is connected
Press the power button
to restart
Press the power button
to restart the machine
after cooling down
Reduce the pressure on
the product
