Max BC-PB-2-WM-2, Руководство по эксплуатации

Страница: 16 / 20

16
Maintenance and cleaning
10 m
aIntenance and cleanIng
The product does not require any maintenance. Enlist
the help of an expert to carry out any repairs. Clean the
product using a soft, lint-free cloth that is clean and dry.
You may dampen the cloth a little with lukewarm water
in order to remove more stubborn marks. Do not use any
detergents containing solvents, as they could corrode the
plastic housing and label.
11 I
nformatIon about radIo operatIon
Radio transmission is performed on a non-exclusive
transmission path, which means that there is a pos-
sibility of interference occurring. Interference can also
be caused by switching operations, electrical motors or
defective electrical devices.
The range of transmission within buildings can
differ greatly from that available in the open air.
Besides the transmitting power and the reception
characteristics of the receiver, environmental fac-
tors such as humidity in the vicinity have an im-
portant role to play, as do on-site structural/
screening conditions.
eQ-3 Entwicklung GmbH hereby declares that this device
complies with the essential requirements and other rel-
evant regulations of Directive 1999/5/EC. You can find the
full declaration of conformity at www.eQ-3.de.