24
GB
TILE CUTTER
Introduction
To get the most out of your new tile cutter,
please read this manual and the enclosed
safety instructions before use.
Please also save the instructions, as you may
need to refer to them at a later date.
This cutter is ideal for small and medium-
sized tiles for fl oors and walls. The bench can
be adjusted to any angle up to 45°, making
angled cuts simple and precise.
Technical data
Voltage/frequency:
230 V ~ 50 Hz
Power rating:
600 W
Free rotation speed:
2,950 RPM
Max. cutting height:
35 mm
Bench size:
330 × 360 mm
Diamond disc:
180 mm Ø,
hole diameter 25.4 mm
Sound pressure, L
pA
:
92 dB(A)
Sound level, L
wA
:
105 dB(A)
Kpa: 3 dB(A)
Special safety instructions
For use on fl at and stable surfaces only.
Ensure the water tank is always full to keep
diamond disc cool when cutting tiles.
Never use bent or broken diamond discs.
Never stop the diamond disc by applying
pressure to the tile cutting machine or the
side of the diamond disc.
Never allow the diamond disc to be in
contact with the item to be cut – or other
objects – when starting the cutter.
Always use protective gloves when handling
the diamond disc. Never put your hand near
the diamond disc or try to remove material
from the working area while the diamond
disc is rotating.
Never use if protective equipment has been
removed or does not work.
Use a piece of scrap wood to feed small items
towards the diamond disc. Never cut items
that cannot be handled safely.
