Max 130.108, Инструкция по эксплуатации

Страница: 4 / 12

4
7. SYNC
When in rhythm mode, press [SYNC].
“SYN” will show on the display. Play any key in the chord key zone (the 1st-19th
key, from left) to activate the accomp rhythm.
8. FILL-IN
Press the [FILL IN] button to add an interlude to the rhythm. The fill played is determined by accompaniment rhythm
selected. After the fill, the selected accompaniment rhythm will continue playing. The Fill In function can be used as often
as desired.
9. START/STOP
Press to start or stop playing selected program.
10. SUSTAIN
Press [SUSTAIN] and the sustain effect will be activated. Press this button again and the sustain effect will be disenabled.
11. VIBRATO
Press the [VIBRATO] and the vibrato effect will be activated. Press this button again and the vibrato effect will be
disenabled.
12. ONE-KEY TRAINING
Press [ONE KEY] to enable the single key training function. P
ress “+”/“-” button to select the song to be learned. One key
training aims at duration learning, and there is no requirement on pitch or creativeness. This mode allows for mistakes
when playing the keys, but the keyboard still plays correct notes and the display will show the correct notes. After one song
is finished, repeat the current song to be learned. Press [START/STOP] or press the [ONE KEY] button to disenable the
training function.
13. FOLLOW TRAINING
Press [FOLLOW] to enable the follow function. P
ress “+”/“-” button to select the song to be learned. With Follow training,
you can learn by following the correct playing notes. The program will wait for you to play the correct note before it moves
to the next one. Notes: In this mode, the Keyboard plays only the correct notes and gives no response to the wrong notes.
Press [START/STOP] or press [FOLLOW] to disenable the training function.
14. ENSEMBLE TRAINING
Press [ENSEMBLE] to enable the ensemble function. P
ress “+”/“-” button to select the song to be learned. The Ensemble
training aims at the correct and comprehensive learning of the song duration and notes. The keynote will be shielded for
ensemble and you need to play the correct note according to the correct duration of the song. If you fail to play within 3
seconds, the keyboard will automatically play the correct note. After one song is finished, repeat the current song to be
learned. Press the [START/STOP] button or press [ENSEMBLE] to disenable the training function.
15. LCD DISPLAY
Displays current mode, notes to play, rhythm, tempo, etc.
16. SINGLE CHORD
Under the state that the rhythm is activated, press [SINGLE CHORD]. After
“Sin” shows on the display, you can play a
single chord on the keys in the chord zone of the keyboard. Press [SINGLE CHORD
] again, “OFF” will appear on the
display. The single chord function will be disenabled.
17. FINGERED CHORD
In this mode, you play the individual notes of the chord in your left hand. Under the state that the rhythm is activated, press
[FINGERED CHORD
]. After the “Fin” shows on the display, you can play a fingered chord on the keys in the chord zone of
the keyboard. Press [FINGERED CHORD]
again, “OFF” will appear on the display. The fingered chord function will be
disenabled.
18. RECORD
Press [REC
] to enable the recording function, “REC” will show on the display. In this mode all played notes will be
recorded. When
storage is full, “FUL” will appear on the display and recording will stop automatically. Press [PLAY] to
playback the recorded notes,
“PLA” will show on the screen. On completion of playback, “REC” will show on the display.
You can record a new rhythm, or you can press [PLAY] to playback the recorded rhythm.
19. PROGRAM
Press [PROG
] to enable the rhythm programming function, “PRG” will show on the display and the keyboard percussion
function will be activated. 32 Percussions can be programmed
at maximum, after that “FUL” will appear on the display and
programming will stop automatically. Press [PLAY] to playback the programming rhythm. Press [START/STOP] or press
[PROG] again to disenable the programming function. All recorded rhythms will be removed.
20. PLAY
Press to playback recorded notes or rhythms.
21. TIMBRE
Press [TIMBRE] to enable the tone selection function. This keyboard provides 255 timbres (
“000” to “254”) for your
selection.
The Tone is defaulted to be “000”, and it can be adjusted by pressing the corresponding number buttons or
pressi
ng the “+” /“-”button.
22. RHYTHM
Rhythm selection:
This Keyboard provides 255 rhythms (
“000” to “254”) for your selection. The rhythm is defaulted to be “000”. Press
[RHYTHM] to initiate the rhythm selection function. Press the numeric keys
or the “+”/“-” buttons to select other rhythms.
Rhythm enabling:
Press [START/STOP] to start accomp rhythm. While in enable state: Press [SYNC
], “SYN” will show on the display. Play
any key in the chord key zone (1st-19th key from left). The accomp rhythm will be activated. Press [START/STOP] to stop
the accomp rhythm.
Interlude:
After the accomp rhythm is activated, press [FILL IN] to have a temporary rhythm play during the accomp rhythm.