9
Wing Assembly (continued)
Attach the cabane struts to the lower wing
panels using the four M3 x 20mm screws, (image
29). The servo control leads pass through the
wings as shown. Do not over tighten the screws
as this will distort the cabane mount.
Carefully place the upper wing on the cabane
and fuselage struts. Secure the top wing in
position using four M3 x 20mm screws, (image
30)
.
Secure the upper wing to the fuselage struts
using four M2 x 10mm screws, (image 31).
7. Final Assembly
© Copyright Century UK Limited 2012 www.centuryuk.com
Connect the top wing servo control leads to
the extension leads routed around the
cabane struts, (image32).
Connect the other ends of the extension
leads to the female connectors located in the
lower wing assembly, (image 33).
There is sufficient space around the servos to
“lose” any excess cable, enabling a neat and
tidy installation, (image 34).
