SAVE THESE INSTRUCTIONS
FOOD PROCESSOR ASSEMBLING
1.
Before the first using, wash all removable parts in warm soapy water, rinse
thoroughly and dry. Wipe the housing with a damp cloth.
2.
Never immerse motor body in any liquid or wash under running water.
3.
Place the motor unit on a level surface.
4.
Align the rib under the bowl with the corresponding slot on the motor unit. Turn
gently until it locks in position.
ATTACHMENTS
CUTTING KNIFE
1.
Fit the cutting knife on the drive spindle.
2.
Load products to be processed in the bowl.
3.
Place lid on the bowl and rotate it to lock..
SUPPORTING DISC (GRATING/SLICING)
1.
Place the shooting disc on the drive spindle.
2.
Fit the reversible grating/ slicing disc over the shooting disc with desired cutting blade facing
upward.
NOTE
: You must complete assembling fully; otherwise you cannot switch on device.
CAUTION: Depend on the majority of foodstuffs, it is advisable to activate the Pulse button
momentarily a few time s in succession and then to continue operating until the required degree of
fineness has been achieved.
Caution: Don’t use this product to chop flour.
Do not remove any parts during the operation.
SOME PRODUCTS PROCESSING
USING THE CUTTING KNIFE
To avoid blades damage do not process hard items such as frozen foods, ice, cereals, rice, spices
and coffee.
Type of food
Preparation
Max
amount at
on time
Time
approximate
Meat
Remove skin and sinew, cut into 1.5cm
pieces, fill with 80ml water or other
liquid spice
150g
20sec.
Fish
Remove bones and skin, cut into 2cm
cubes
100g
10-20sec.
Onions
Peel and cut into 2-3cm pieces
70g
7 short bursts
Garlic
Peel
3 cloves
5sec.
Apple (raw)
Peel, remove cores and cut into 2cm
pieces
100g
10-15sec.
Carrots
Peel and cut into 2cm pieces
140g
20sec.
Cabbage
Remove the core and cut into 2cm
pieces
70g
5sec.
Tomatoes
Cut each into 4-6 pieces
70g
10-15sec.
Mushroom
Quarter for best results.
1/2cup
10-15sec.
When processing is finished, switch off, and then unplug the appliance and wait the motor will
stop before removing a food and attachments.
CLEANING AND CARE
1.
Switch off and unplug the appliance.
2.
Wash the accessories immediately and avoid soaking them in water for long periods; wash in
warm sudsy water after each use. Dry all accessories with a clean cloth. Do not use a dish
washing machine.
3.
Wipe housing with a damp cloth.
4.
Do not use scouring pads, abrasive and harsh detergents.
5.
Do not immerse the motor unit in any liquid or in a dishwasher.
CAUTION: The blades are extremely sharp and therefore dangerous. Handle with caution!
STORAGE
Be sure that the appliance is unplugged.
Compete all requirements of Chapter CLEANING AND CARE.
Keep the appliance in a dry clean place.
