max mobility Folder Adaptor Bar Скачать руководство пользователя страница 4

Страница: 4 / 4

mobility

max

Fig. O

Fig. P

The two spring loaded end caps engage the quick-release axle tips of the folding frame wheelchair that protrude out of the axle

receiver plugs. These spring loaded end caps are compressible to allow for clearance and then released to be positioned over these axle

tips (Fig. O). The tension force of the springs constantly push out to prevent the adaptor bar from coming off the wheelchair until it

is desired, at which point the end caps are compressed and the adaptor bar/drive unit are removed.

If buttons were purchased, refer to their separate instructions for

mounting directions. The buttons plug into to the drive unit using

the magnetic connector that snaps into the receptacle on the drive

unit housing (Fig. P).
Refer to the User’s Manual for SmartDrive operation.

Drive Unit Attachment

Making sure the wristband is off, power on the drive unit by flipping the toggle switch to the on position prior to attachment. “On” is push-

ing the toggle away from the front of the drive unit (Fig. N). You will get a loud beep and the blue LEDs will illuminate as indication.

Fig. N

Содержание Folder Adaptor Bar

Страница 3: ...daptor bar prior to installation onto the wheelchair First slide the custom fit rubber stopper into the gap on the drive unit Fig I Lower the drive unit over the attachment protrusions Fig J and rotate downward until it stops Fig K Fig I Fig J Fig L Fig M Fastened together using the provided thumb screw Fig L thus securing the drive unit to the adaptor bar Fig M Fig K ...