SpinWash LED RGB
152.714
V1.0
USING THE MAX SPINWASH
In addition to regular use, the Max SpinWash is also suitable for wall mounting. Carefully check the measurements in
below illustration before starting the mounting process. No rights can be derived from the dimensions mentioned.
Above (right) illustration shows the remote control layout. To learn
about the functions of the remote control, look for the corresponding number in below function
descriptions/explanations.
1. ON/OFF
Turn the device on or off.
2. LED ON/OFF
Turn the outer LED-ring on or off.
3. FLASH ON
Turn flash mode on. To cancel flash mode, press
Auto or Sound mode.
4. AUTO
Press to start the pre-set light show.
5. RESET
Press to reset the device.
6. SOUND
Turn sound-active mode on or off.
7. STROBE SPEED
Increase or lower the speed of the strobe effect.
8. AUTO MODE SPEED
Increase or lower the speed in auto-mode.
TECHNICAL SPECIFICATION
Light source
: Single colour LED
Led colours
: Red, Green, Blue
Quantity of LEDs
: 108
IP rating
: IP20
Modes
: Automatic programs, IR, Sound to Light
Power consumption
: 0.27 – 0.13A
Power supply
: 100-240VAC 50/60Hz (1.8V Adapter)
Dimensions (L x W x H)
: 132 x 26mm
Weight
: 0.12kg
The products referred to in this manual conform to the European Community Directives to which they are subject:
•
Low Voltage (LVD) 2014/35/EU
•
Electromagnetic Compatibility (EMC)
2014/30/EU
•
Restriction of Hazardous Substances (RoHS) 2011/65/EU
