- GB.4-V1 -
the tester is connected to a vehicle battery.
3.
Make sure the battery terminals are clean. Wire brush
them if necessary. Clamp the black load lead to the
vehicle negative battery terminal. Clamp the red load
lead to the vehicle positive battery terminal. Please
clamp on the lead part of the terminal only. Clamping on
the iron part of the terminal will lead to wrong test
results.
4.
Paper load: Open the clear cover. Insert paper to the
paper feeding for auto running the paper into printer
.
Press the “
↑
” key to get more paper out.
STEP 1: Connected the
clamps to the tested
battery.
STEP 2: Open the clear cover
STEP 3: Insert the paper into
the paper feeding.