![MAVIG GD50-STD Скачать руководство пользователя страница 15](http://html1.mh-extra.com/html/mavig/gd50-std/gd50-std_instructions-for-use-manual_1742670015.webp)
15 / 22
DOK-ID: GDX01G01, BE #6600013
1.
General Information
1.1. Manufacturer
MAVIG GmbH
Stahlgruberring 5
81829 Munich
Germany
Phone
+49 (0) 89 420 96 - 0
Fax
+49 (0) 89 420 96 - 200
Web
www.mavig.com
1.2. Operation and Operator
Only appropriately trained personnel may operate, clean and disinfect the product (medical and
radiological technical knowledge in accordance with country specific regulations).
The instructions for use are valid only after a properly conducted first commissioning.
Product must be thoroughly cleaned and disinfected before first use.
1.3. Symbols, Safety and Warning instructions
SAFETY-
RELEVANT
Safety relevant instructions are mandatory and must be followed. Non-
observance could result in injury or death of one or more persons. You must
read and understand these instructions before starting up the systems.
CAUTION
Cautions must be observed, otherwise the device may be damaged or
malfunction. You must read and understand these instructions before starting
up the system.
Comply with instruction
The accompanying documentation must be observed. These are available in
digital form in various languages on the specified website.
Collision warning
Collisions with other equipment can cause structural failure of the suspension
arm, resulting in operator or patient injury. If collision occurs, the arm has been
inspected immediately by a qualified service technician.
SAFETY
RELEVANT
Risk of injury
The manufacturer must be immediately informed of any damage to the system.
Stop all use of the device until the damage is rectified: Disconnect the system
from the mains. Do not stand or work beneath the system.