12
14. ELEVATION SET UP AND DATA REVIEW MENU
14.1. Entering the Elevation set up and data review menu
From any screen, press and hold the left button (BPL) for 2 seconds to enter the elevation set
up and data review menu.
The elevation set up and data review menu is sequentially organized in sub-menus, in the
following order:
1. Recall of home altitude “Ho” (Wintech USB Alti and Wintech USB Ultimate only)
2. Setting up the current altitude “Cu” (Wintech USB Alti and Wintech USB Ultimate only)
3. Lowest and highest trip ele time spent bellow, in and above the HRM target zone
“Info” (Wintech USB Alti, Wintech USB HR and Wintech USB Ultimate only)
4. Reading of lap time (“Cr”)
5. Reading of odometers per bike number (“odo”)
To move from one sub-menu to the next one, briefly press the left button (BPL).
When on one of the sub-menu, briefly press the right button to enter this sub-menu.
In this mode, if there is no operation for 2min, the computer automatically exits the menu and
return to the previous active screen.
When on one of the sub-menu, briefly press the right button to enter this sub-menu.
In this mode, if there is no operation for 2mn, the computer automatically exits the menu and
return to the previous active screen.
The reading of altitude and heart rate data, lap time and odometer per bike can
be performed more easily and more rapidly using the Wintech Manager software
delivered with your computer.
14.2. Recall of Home Altitude
(Wintech USB Alti and Wintech USB Ultimate only)
This function will make adjusting the altitude before a ride simple and easy, thanks to the home
altitude set at chapter 10.3.3 of this user guide.
Enter the elevation set up and data review menu:
From any screen, press the left button for
2 seconds: “Ho” appears together with the
logo.
Briefly press the right button (BPR) to
recall the home elevation. The figure
flashes.
Press the right button (BPR) again to
validate and return to the last active
display.
14.3. Setting up the current elevation
(Wintech USB Alti and Wintech USB Ultimate only)
When you occasionaly don’t start from the place which elevation is registered in your computer
(home elevation), you need to adjust the current altitude.
Enter the elevation set up and data review section:
From any screen, press the left button for 2 seconds: “Ho” appears together with the logo.
Briefly press the left button (BPL) once to switch to the Current elevation set up screen:
“Cu” appears on the computer screen.
Briefly press the right button (BPR) to enter the Current Altitude set up menu: the first digit of the
current altitude flashes.
Briefly press the left button (BPL) to adjust the first digit.
Briefly press the
right button (BPR)
to validate your
choice and move to
the next digit.
Repeat those steps
to the 4
th
current
altitude digit.
Briefly press the
right button (BPR)
to validate the 4
th
current altitude digit,
exit the elevation set
up and data review
menu and switch
back to the last
active screen.
14.2
2 sec.
1 click
1 click
any
screen
EXIT
14.3
2 sec.
1 click
1 click
1 click
select
select
select
select
1 click
1 click
1 click
any
screen
EXIT
14.1
2 sec.
any
screen
1 click
1 click
1 click
1 click
1 click
EXIT
1 click
enter
1 click
enter
1 click
enter
1 click
enter
1 click
enter
