Operation
-36-
Maverick MK1 Hybrid User Manual Rev. 2
Offset Mode
The Offset mode provides fine adjustments for the home position of all the moving parts in the
optical path as well as the pan and tilt movements. This way, when in their home position, the
moving parts do not show any border or reduce the light output.
1. Starting from the Main Level screen, press and hold
<MENU>
until the passcode screen
appears.
2. Enter the passcode
2323
using one of the following methods:
•
Through the touchscreen: use the number pad on the screen to enter
2323
.
•
With the buttons:
Use
<DOWN>
to select the number to be changed.
a.
Use
<UP>
to increase the value.
b.
Repeat until
2323
has been entered.
c.
3. Press
<ENTER>
.
This brings you into the Zero Adjust menu screen.
PAN
To adjust the starting point of the pan motor, follow the instructions below:
1. Use
<UP>
or
<DOWN>
to select
PAN
.
2. Press
<ENTER>
.
3. Use
<UP>
or
<DOWN>
to increase or decrease the starting value, from
000–255
.
4. Press
<ENTER>
.
TILT
To adjust the starting point of the tilt motor, do the following:
1. Use
<UP>
or
<DOWN>
to select
TILT
.
2. Press
<ENTER>
.
3. Use
<UP>
or
<DOWN>
to increase or decrease the starting value, from
000–255
.
4. Press
<ENTER>
.
ZOOM
To adjust the starting point of the zoom motor, follow the instructions below:
1. Use
<UP>
or
<DOWN>
to select
ZOOM
.
2. Press
<ENTER>
.
3. Use
<UP>
or
<DOWN>
to increase or decrease the starting value, from
000–255
.
4. Press
<ENTER>
.
MAC Address
To assign the fourth, fifth, or sixth digit of the MAC address, do the following:
1. Use
<UP>
or
<DOWN>
to select
MAC4
,
MAC5
, or
MAC6
.
2. Press
<ENTER>
.
3. Use
<UP>
or
<DOWN>
to increase or decrease the value, from
000–255
.
4. Press
<ENTER>
.
