manualshive.com logo in svg

mATX AIMB-763 Series, Руководство пользователя

Поделиться
Скачать
mATX AIMB-763 Series Скачать руководство пользователя страница 15

3

Chapter 1  Product Introduction

1.3

Special features

1.3.1

Product highlights

Latest processor technology

The motherboard comes with a 775-pin surface mount Land Grid Array 

(LGA) socket designed for the Intel

®

 Pentium

®

 D, Pentium

® 

4, Celeron

®

 

or 

 

Core

TM 

2 Duo processor in the 775-land package. The motherboard 

supports the Intel

® 

Pentium

®

 4, Intel

® 

Pentium

®

 D or

 

Core

TM 

2 Duo pro-

cessor with 1066/800/533 MHz Front Side Bus (FSB). The motherboard 

also supports the Intel

®

 Hyper-Threading Technology and is fully com-

patible with Intel

® 

PCG 04B/04A and 05B/05A processors. 

Intel

®

 65nm Dual-Core Technology CPU support

This motherboard supports Intel

®

 Pentium

®

 D/Pentium

®

 4/Celeron

®

 / 

Core

TM 

2 Duo processors built on the 65-nanometer (nm) process tech-

nology with copper interconnect.

Dual-core processors contain two physical CPU cores with dedicated L2 

cachesto meet demands for more powerful processing. Intel

®

’s 65nm pro-

cess is the most advanced chip manufacturing technology, delivering 
breakthrough performance, enhanced media experience, and low power 

consumption. Intel

®

 65nm dual-core processors utilize the latest package 

technologies for a thinner, lighter design without compromising perfor-
mance.

Intel

®

 945G chipset

The Intel

®

 945G graphics memory controller hub (GMCH) and the ICH7 

DH I/O controller hub provide the vital interfaces for the motherboard. 

The GMCH features the Intel

®

 Graphics Media Accelerator 950, an inte-

grated graphics engine for enhanced 3D, 2D, and video capabilities. The 
GMCH provides the interface for a processor in the 775-land package 
with 533/800/1066 MHz front side bus (FSB), dual channel DDR2 at 
speeds of up to 667 MHz, and PCI Express x16 graphics card.

The Intel

®

 ICH7 DH Southbridge represents the seventh generation I/O 

controller hub that provides the interface for PCI Express and 8-channel 
high definition audio.

Содержание AIMB-763 Series
























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды