Mattel Electronics Intellivision 2609 NTSC, Руководство по установке

Страница: 15 / 23

Now comes the hardest part. Drill two holes in the housing; choose
the position shown in the picture, next to the power plug. You can
use the positioning device provided on the last page of this guide.
Be sure to use an appropriately sized drill bit, if you are unsure
which size is correct, use a smaller sized bit first. Attach the rca
connectors carefully.
***Note*** Your mod might be delivered with three RCA connec-
tors. Bridge the wires from one audio connector to the other (inner
wire to inner connection, outer wire to outer connection). You will
find a positioning device on page 20 of this guide to help you fin-
ding the right position for the RCA connectors.
13
Step 9