Single Phase
EV Charger Protection unit
3 |
P a g e
Once installed, the unit has a Live Mains Supply (230v or higher)
within the enclosure. The cover must not be removed until the
supply to the unit has been isolated or disconnected.
Product Description
The
matt
:
e
Single Phase Electric Vehicle Charger Protection units (SP-EVCP-
T&R) are designed for use in domestic dwelling applications where single
phase PME supplies are feeding Electric Vehicle Chargers. They should NOT
be used on premises with 3 phase supplies
This manual covers the SP-EVCP-T & SP-EVCP-R
The units are not intended for any purpose other than that defined within
this document.
WARNINGS
Please read and observe the following notices carefully. These warnings must
be observed when installing and operating the Electric Vehicle Charger
Protection units.
All relevant supplies must be isolated or disconnected before commencing any
work. This product must be installed by a competent person in accordance with
the IEE Wiring Regulations, BS7671 (18
th
Edition or later) and any relevant Building
Regulations and/or Installation Regulations.
Safety Advice
The unit must be installed in a dry ventilated location; it must never be covered or
have restricted ventilation.
The SP-EVCP-R and SP-EVCP-T units are rated for a maximum 32A.
For any information not contained within this document, please contact our
technical support team on 01543 227290 or [email protected].
