Matsushita Electric SE-HD510, Руководство по обслуживанию

Страница: 8 / 29

4. Turn on the power of the Amplifier (SE-HD510).
5. Press INPUT SELECTOR to select the external source (EXT/MD) of
the Amplifier (SE-HD510).
6. Input a sound signal to external input terminal of Tuner (ST-
HD510), and confirm to be outputted from the speaker. (Both
“High” and “Low”.)
Fig. 1
8. Schematic Diagram Notes
8.1. Type Illustration of IC's, Transistors and Diodes
8.2. Schematic Diagram Notes
- This schematic diagram may be modified at any time with the
development of new technology.
Notes:
- S301: Power "STANDBY / ON" ( ) switch in “ON”
position.
- S302: Eco mode (MODE) switch in “OFF” position.
- S303: Input selector(INPUT SELECTOR , -DVD DIRECT)
switch.
- S308: Input selector (INPUT SELECTOR ) switch .
- S308: BLFS (BLFS) switch.
- VR301: Volume V.R.
- VR401: Fine tweeter control V.R.
- Indicated voltage values are the standard values for the unit
measured by the DC electronic circuit tester (high-impedance)with
8