Matsushita Electric KX-TC1461LAB, Руководство по обслуживанию

Страница: 57 / 77

tester with a ground.
2. The schematic diagrams and circuit board may be modified at any
time with the development of new technology.
Important Safety Notice:
Components identified by mark have special characteristics important
for safety. When replacing any of these components, use only the
manufacturer´s specified parts.
24.2. Handset ( SCHEMATIC DIAGRAM (Handset) )
1. DC voltage measurements are taken with an oscilloscope or a
tester with a ground.
2. The schematic diagrams and circuit board may be modified at any
time with the development of new technology.
25. SCHEMATIC DIAGRAM (Base Unit)
25.1. Main
25.2. RF Module
26. SCHEMATIC DIAGRAM (Handset)
26.1. Main
26.2. RF Module
27. CIRCUIT BOARD (Base Unit)
27.1. Main (Component View)
27.2. Main (Flow Solder Side View)
27.3. Locator (Component View)
27.4. Locator (Flow Solder Side View)
27.5. RF Module
28. CIRCUIT BOARD (Handset)
28.1. Main (Component View)
28.2. Main (Flow Solder Side View)
57