Matsushita Electric CQ-C8403W, Руководство по обслуживанию

Страница: 10 / 59

Pin
No.
Port Part Name &
Description
I/O (V)
28 X SYNC Clock for Cathode
scan; or Latch strobe
for Anode output
pulse width adjusting
data and Anode
output current
adjusting data O 0
29 A CLK TA Anode output pulse
width adjusting clock O 2.7
30 NC Not connected - -
31 NC Not connected - -
32 S DIS Disable for Cathode
drive O 2.4
33 NC Not connected - -
34 NC Not connected - -
35 NC Not connected - -
36 NC Not connected - -
37 NC Not connected - -
38 PADJ IO1/
TXD
Anode output pulse
width adjusting data 0
(Image data); or Serial
data for Flash writer O 1.2
39 VCC5.0V Power supply - 3.3
40 RXD Serial data from Flash
writer I 1.3
41 GND GND - 0
42 DCLK MST/
SCLK
Master D-CLK (Clock
for image data);or
Serial clock from
Flash writer O/I 3.3
43 BUSY Busy for Flash writer O 1.5
44 OEL OE OEL output enable O 0
45 PADJ IO0 Anode output pulse
width adjusting data 0
(Image data) O 1.8
46 DCLK SLV0 Slave D-CLK 0 (Clock
for image data) I 2.7
47 UART SS0 GND - 0
48 NC Not connected - -
49 FLASH CE Chip enable for Flash
memory O 1.7
50 NC Not connected - -
51 NC Not connected - -
52 RY/BY Pulled up to H - 3.6
53 NC Not connected - -
54 EPM Program mode enable
for Flash writer I 2.3
55 NC Not connected - -
10