background image

Sa

tet

W

ar

nings

Oper

ation

Cleaning 

and 

M

ain
tenanc

e

Specifica

tion

Bef

or

U

se

GB-4

Reverse the door swing

- Ensure the appliance is unplugged and empty.  

- Adjust the two leveling feet to their highest position.

- We recommend you have someone to assist you.

Tools required 

- Phillips style screwdriver 

- Flat bladed screwdriver

- Hexagonal Spanner

Note: Take the door off it is necessary to tilt the larder backward. You should rest the larder on something solid and 

place something under the rollers so that it will not slip during the door change process. 

DO NOT lay the larder completely flat as this may damage the coolant system. 

1. Remove the screws at the rear of 

top cover and then take the top 

cover away. 

2. Remove the screws and bracket from the topside

and fit back to where the hinge bracket was 

located on the opposite side (right to left).  

A spanner may be required to loosen the bolts fin. 

3. Slide the door up and lift away

from the appliance. 

4. Remove screws and hinge bracket and refit on

opposite side.

5. Slide the larder door back on to the

lower hinge. Making sure it’s the 

right way up. Screw the hinge 

bracket into place on the new side.

6. Check that door is aligned

horizontally and verti-

cally and that the seals are 

closed on all sides before 

finally tightening the bot-

tom hinge. 

Re-adjust the leveling feet.

Содержание MTL2488GS









Отзывы: