36
GB
Connecting the Induction Hob to the Mains Power Supply
screw A
1. Remove the 2 screws A and push the top
plate back and then lift it up.
2. Insert the mains cable at the connection.
• The induction hob must be connected to the mains power only by a suitably qualified
electrician. Check with an electrician whether the domestic wiring system is suitable
without alterations.
• Before connecting the hob to the mains power supply, check that:
1. The domestic wiring system is suitable for the power drawn by the hob.
2. The voltage corresponds to the value shown on the rating plate.
3. The mains cable sections can withstand the load specified on the rating plate.
• To connect the induction hob to the mains power supply, do not use adapters,
reducers, or branching devices, as they can cause overheating and fire.
• The mains cable must not touch any hot parts and must be positioned so that its
temperature will not exceed 75°C at any point.
• Check with an electrician whether your domestic wiring system is suitable without
alterations.
• Any alterations must only be made by a qualified electrician.
MINDHOB19E_IB_5L_RC_210309_grace.indb 36
9/3/2021 3:01 PM