Using your mixer
To avoid splashing place the beaters in the mixture before switching the mixer on and do not remove the
beaters
from the mixture while mixing.
Plug the mixer into the mains and
switch on at the mains socket.
Make sure the beaters are properly
fixed.
Slide the power switch to
1 and
up the speed
.
build
gradually
five different
Your mixer has
speed settings. 1
is the slowest
setting and 5 is
the fastest.
1
2
4
5
3
To prevent any splashing when you
switch the mixer on, place the
beaters into your mixture before
switching the mixer on.
6
The mixer will start. To make sure
that your mixture mixe properly,
s
move the mixer around in the bowl.
Switch the mixer off by turning the
power switch to . To clean the
off
excess mixture off the
s,
beater
tap
gently
them
on the side of the
MHM120 version 2.p65
06/05/99, 11:06
5
1
3
2
4
5
0 f f
bowl.