Matsui MFI45, Инструкция по эксплуатации, Страница: 15 / 16

Minimum and maximum permissible inlet water pressure : 0.04-1.00 MPa.
Specifications: RATED VOLTAGE: 230V / 50Hz
RATED POWER: 1930W
B RATED ENER GY EFFICIENCY
B RATED WASH PERFORMANCE
B RATED DRYING PERFORMANCE
8 PLACE SETTINGS
3 WASHING PROGRAMMES
ELECTRONIC CONTROL
AUTO MATIC RINSE AGENT AND
DETERGENT DISPENSER
STAINLESS STEEL INTERIOR
ADJUSTABLE FEET
SALT / RINSE AID REFILL INDICATORS
This symbol on the product or in the instructions means that your electrical and electronic
equipment should be disposed at the end of its life separately from your household waste. There
are separate collection systems for recycling in the EU. For more information, please contact the
local authority or your retailer where you purchased the product.
12
Tea or coffee stains using a solution of 1/2 cup of bleach and 3 cups warm water
to remove the stains by hand.
Iron deposits in water
can cause an overall film
You have to call a water softener company for a special filter.
Hard water minerals To clean the interior, use a damp sponge with dishwasher
detergent and wear rubber gloves. Never use any cleaner other
than dishwasher detergent for the risk of foaming or suds.
Dishes block detergent
cups Re-loading the dishes properly.
Normal phenomenon
There is some steam coming through the vent by the door
latch during drying and water draining.
Aluminum utensils have
rubbed against dishes
Use a mild abrasive cleaner to eliminate those marks.
This is normal A small amount of clean water around the outlet on
the tub bottom at the back of the tub keeps the water
seal lubricated.
Be careful not to overfill the rinse aid dispenser.
Spilled rinse aid could cause oversudsing and lead
to overflowing. Wipe away any spills with a damp cloth.
Make sure the dishwasher is level.
Overfill dispenser or rinse
aid spills
Dishwasher isn t level
'
Flexible doorlook cause
displacement Loose the screw of fixing door lock and adjust to a
suitable place .Then fix the screw again.