Matsui MF3WN, Руководство по установке

Страница: 7 / 8

6
●
Attention
●
Start of dishwasher
The followings should be checked before starting the dishwasher.
Whether the dishwasher is level and fixed
Whether the inlet valve is opened
Whether there is leakage at the connection
Whether the appliance is pluged into on electricl supply
Whether the power is switched on
Whether the inlet and drain hoses are knotted
All packing materials and printings should be taken out from the dishwasher
1
2
3
4
5
6
7
After installation, please keep this installation manual safe with the instruction manual.
The content of this manual is very helpful to the user.
Illustration of feet adjustment
Check Level
Side To Side
Check
Level
Front
to Back
The dishwasher must be level for the racks to operate correctly and to give maximum wash
performance.
Place a spirit level on the door and the lower rack rail as shown in diagram 1 to check that
the dishwasher is level.
It is easy to level the dishwasher by adjusting the four leveling legs individually from the front
of the dishwasher.
2.1 Refer to Remark A diagram 2 below for adjustment of the rear legs,turn the screw clockwise to
lower the rear legs until the correct height is obtained.
2.2 Refer to Remark B diagram 2 below adjustment of the front legs to obtain the correct height.
leveling the dishwasher please be careful not to allow the dishwasher to
1
2
3
When tip over.
1
2
Remark A adjuster pole to
adjust the height of back foot.
Remark B to adjust the height
of front foot by spanner.