3
Remove the lamp rim by unscrewing
the two screws.
5
Screw the fixed lamp rim tightly in a
clockwise direction.
4
Uncap the bulb and replace with a new
one.
6
Replace the filters.
To ensure the filters do not become a fire
hazard we recommend they are washed every
3 months. Do not check the filter panels whilst
the Cooker Hood is in use.
1
Before cleaning the filters always switch
off and disconnect the electrical supply.
2
Remove the filter panels by holding down
the buttons on each panel and lifting
towards you. They can then be taken out
of the cooker hood.
3
Wash each filter in warm water and a
mild detergent, leave to soak and drain.
Ensure it is completely dry before
replacing into the Cooker Hood.
4
Place the bottom of each panel into the
back of the Cooker Hood and raise the
top to click into position.
NOTE: The filter panels are also dishwasher
proof. The filter panels may alter in colour
slightly after several washes, this is not a fault.
Warning: Hold the bulb as it will drop
downwards as it’s released.
Cleaning the filters
Changing the internal light
Allow the Cooker Hood to cool for at least
30 minutes after use before changing the
light bulb.
1
Before carrying out the bulb replacement
always switch off and disconnect the
electrical supply.
2
To remove filters hold down buttons on
each panel and lift towards you.
The Cooker Hood is not working
•
Check it is plugged in and switched on.
•
Check that the fuse in the plug has
not blown.
•
Plug in another appliance, such as a
lamp, to see if the socket is working.
Servicing
Only an authorised, qualified technician
should perform repairs and maintenance of
the appliance.
Maintenance and Troubleshooting
5
