Align the BASE with the neck of
the fan and use the BASE SET
SCREW to join the two together.
1
How to assemble your fan
Make sure
your fan is
unplugged
before you
attempt to
assemble
Push the BLADE onto the MOTOR
SHAFT. Ensure the slot in the BLADE
matches up with the notch on the
MOTOR SHAFT.
3
2
Align the rear guard with the three
pins on the MOTOR (ensuring the
handle is positioned at the top of the
fan). Insert the plastic nut and tighten.
Adjusting Knob
Motor
Oscillating pin
Rear Guard
Screw
Nut
ON/OFF
Base
Power Cord
Front Guard
Blade
Screw cover
Plastic nut
Height Adjusting
Knob
and Speed Buttons
GB
